Glass Splashback — Nottingham
A bespoke toughened glass splashback supplied and installed for a residential kitchen in Nottinghamshire.
■ Glass Splashbacks ■ Nottingham ■ March 2025
This 6mm toughened glass splashback was supplied and installed for a residential kitchen in Nottinghamshire, covering the full wall area behind the hob and worktop in a single sheet.
The panel was manufactured to the customer\\\\\\\'s exact dimensions — measured on site to account for the socket positions and the worktop return at each end. Two socket cutouts were required, diamond-cut into the toughened glass at the time of manufacture. Cutouts of this type must be specified before the glass is toughened; they cannot be drilled in afterwards without risk of fracture.
The glass was bonded directly to the wall using a colour-matched neutral-cure silicone sealant. A neutral-cure product was used rather than acetic-cure silicone to avoid any reaction with the paint surface behind the glass. The panel was held in position while the sealant cured and then sealed along all four edges to prevent moisture ingress behind the panel.
The installed surface has no tile joints, no grout, and no gaps for grease or moisture to penetrate. The 6mm toughened specification is hob-safe — toughened glass does not conduct heat through its thickness in the way a thin backing material might, and the installation clearance from the nearest burner was confirmed against the hob manufacturer\\\\\\\'s requirements before fitting.
Send us a photo and rough sizes — we'll give you a ballpark price the same day.
Photos
Glass Splashback — Nottingham
Related Services — Glass Splashbacks
We regularly carry out installations across Nottingham and the surrounding area. See all our work in Nottingham →
Similar Projects
Looking for a Glass Splashbacks in Nottingham?
Send us a photo and rough sizes — we'll confirm the right system and give you a ballpark price the same day. No site visit needed to get started. All quotations are fixed-price and carried out by our own team.